Electrical Installations
The electrical installation is made with copper conductors, corresponding to the fire hazard category and fire resistance rating for each compartment.
THE LEVEL APARTMENTS also features energy-efficient solutions and smart elements, offering residents advanced home automation technologies.
By being detail-oriented, using premium materials and up-to-date finishes, the future homes will have optimal compartmentalization and large glazed areas, so that the apartment will benefit from the natural light and architectural space offered.
The terraces are among the largest existing in residential projects in Bucharest, with a novelty element – the floating floor optimal for every season.
The existence of the fully ventilated facade will allow a high energy efficiency of the project, forming a well insulated area in the wall structure. In this way, the retaining wall is protected from both cold and heat, leading to energy savings.
The air-conditioning of the rooms in summer will be realized with multi-split air-conditioning systems. Each system will be composed of indoor duct type units that will be mounted in the hulls and will be connected by means of pipes/couplings to the discharge/suction grilles, and an outdoor unit located on the balcony of each apartment.
The BMS type control system is composed first of all by the basic equipment, namely a 7 inch touch display controller which will be mounted in the center of gravity of the apartment, in the living room and the Mix Controller which will be mounted in the automation panel.
The communication protocol used in this concept is called KNX and is the most powerful and stable communication protocol at present.
The beneficiaries of the apartments will control the following systems from this 7 inch Touch Display Controller as follows :
Underfloor heating in each room;
Climate control via Hisense ceiling indoor units;
General lighting in each room and balconies;
Monitoring of access to the building via video intercom system;
Real time display of outdoor temperature and climatic conditions in the area;
Different control scenarios and logic functions
The parking lots have been sized according to the standards, 86 underground parking spaces AND 50 overground parking spaces.
A typical parking space is 2.50 m x 5 m. The access lane for the basement parking, as well as the access lane on the ground floor (entrance / exit – two-way) has a minimum width of 6.0m, with special maneuvering spaces on the basement level.
The minimum height in the basement and access ramps shall not be less than 2.20 m.
The finishes used are premium. The overall picture is coherent. The common spaces, the access area in the complex, the lobby areas are specially treated, with a design that has a chromatic, material, style and concept connection with the finishes on the exterior of the building and inside the apartments.
The electrical installation is made with copper conductors, corresponding to the fire hazard category and fire resistance rating for each compartment.
The calibration of thermal installations was made taking into account the geographical parameters and climatic conditions of the area. Heating will be underfloor and each apartment will be individually metered.
The sanitary installation will be made of top quality materials from PORCELANOSA by DELTA STUDIO. The sanitary objects were carefully chosen following the design concept.
All apartments will have ready-made air-conditioning routes, with indoor duct units mounted in drywall shells. Ventilation will be through slot grilles and the equipment will be controlled by wall remote controls.
Tell us a few details about what you're looking for, and we'll prepare an offer tailored to your budget and preferences. A real estate specialist will contact you to present the best options.
or fill out the form for available apartments and we will call you!